Construction
All Flagpoles are manufactured in the United States. All flagpole sections are produced in 2”diameter heavy duty 16 gauge thick and deburred anodized polished aluminum 56” or 72” long sections. Whether you choose the standard anodized aluminum or the all weather scratch resistant powder coated color finish, each section slips easily together and appears to be seamless. Each flagpole can be shipped UPS and comes complete with a United States poly material flag, 3” diameter gold anodized aluminum ball top, heavy duty aluminum in-ground sleeve, complete installation and instruction sheet, and a proper flag etiquette and flag holidays information booklet.

Decorator Colors Powder Coated Finishes
The decorator chosen color finishes provide the opportunity to order your flagpole sections in the colors of your choice. This unique feature allows you to custom design and color coordinate each flagpole to your flag, building or landscape. The standard powder coated color finishes are Deep Black, Matt Arch Brown, Ivy Green, Royal Blue, Purple, Sky Blue, Brilliant Red, Saturated Orange, Gold Metallic, Safety Yellow, Bright White, and Cloud Gray. Custom color finishes are available.

Flagpole Styles
All flagpoles come in 56” or 72” long sections and are 13’, 17’ or 21’ above ground. They are designed to fly either one or two flags and can be lowered to fly at half-staff. Flagpoles with the classic “No Halyard Rope” system are designed with the non-yellowing polycarbonate swivels to be halyard, pulley, flag wrapped around the pole, and noise free. The specially designed Halyard Rope Style Flagpole provides the convenience of raising and lowering the flag from a standing position. This enables the flag to be “ wrapped around the pole” resistant, and allows you to remove or lower the flag to a half-staff position.

E-Z Installation
The in-ground aluminum installation sleeve securely holds the flagpole in place and withstands winds up to 60 MPH. Installation of the in-ground sleeve takes around 20 to 30 minutes to complete. The pole being designed in sections gives you the opportunity to remove the top sections all the way down to the permanent in-ground section. The entire balance of the pole can be removed and taken to an off site location for presentation.

Multi-Use Mountings
When using the convenient mountings, your flagpole system can be taken anywhere and installed in seconds.
The Above Ground Mount holds the flagpoles securely with a 42” long stake that can be inserted into the grass or ground.
The Telescoping Hitch Mount holds the flagpole securely to the truck, car or RV hitch, can be used with the truck gate open or closed and will attach to either 1.75” or 2” square ID hitch.
The Deck, Dock & Balcony Mount holds the flagpole securely to a boat dock, or a home or office deck or balcony.
The Under the Tire Mount holds the flagpole securely and safely near the vehicle by driving the vehicle over the flat part of the mounting. The weight of the car, RV, truck or boat holds the mounting in place. The flagpole can be used for tailgate parties, to identify locations, and to enhance the enjoyment of presenting the flag of your choice outdoors at your special event easily, quickly, and safely.

Parts and Service
All flagpoles come with a 5 year limited warranty on all parts. Replacement parts are available through the customer service department.

Prices
Call for prices.

http://www.bannermarketinggroup.com